Follow Us

PHCC Pro Series 1850
Battery Backup Sump Pump System

Remote Notification

PHCC Pro Series 1850 Battery Backup Sump Pump System Download Manual  Download PDF

Other PHCC Backup Sump Pumps Available:
PHCC - 2400
PHCC - 1000


    Dependable 1850 GPH, continuous-duty, submersible pump
  • Pumps 1850 GPH at a 10-foot lift
  • Stainless steel shaft, rulon seal, and rustproof housing provide long-lasting, reliable operation
  • Computer programmed battery charging system
    - Minimizes water loss in battery
    - Ensures that the battery is
       always fully charged
  • Remote terminals to connect to a home security system, auto dialer or other device
  • Computerized controller continuously monitors the pump, battery and power conditions to ensure dependable operation
    - Sounds an alarm and indicates
        - Battery needs water
        - Battery is old and needs to
          be replaced
        - Battery is discharged or
        - Cable is loose or terminals
          are corroded
        - Power, fuse or circuit
          breaker has failed
        - Pump has been activated
  • Accommodates up to two (2) B-2200 batteries for 120 hours of pumping*
  • Alarm can be silenced during an emergency and will automatically reset in 24 hours
  • Designed for use with maintenance or maintenance free batteries
    • * Based on 10% duty cycle. Run times
        may vary based on inflow of water.
Flow/Amp. Draw @ 0 ft Head
2,500 GPH / 10-12 Amps DC
Flow/Amp. Draw @ 10 ft Head
1,850 GPH / 9.0 Amps DC
Max Head
16 ft (4.9 M)
Snap-on Non-corrosive ABS Screen
Motor Type
Power Input
120 VAC, 60Hz
Output Voltage/Current
12 VDC 1.6 Amps
Pumping Time with B-2200 Battery
60 Hours*
Pumping Time with B12-90 Battery
60 Hours*
Pumping Time - Intermittent Duty
Days of pumping
Float Switch
Dual micro reed switch
Shipping Weight
12.0lb. (5.4Kg)
*Based on 10% duty cycle. Run times may vary based on inflow of water.
9.0" (22.9 cm)
5" (12.7 cm)
8.75" (22.2 cm)
  1. Pump housing - non-corrosive ABS
  2. Impeller - Non-corrosive ABS
  3. Stainless steel shaft
  4. Carbon ceramic w/rulon seal
  5. Dual ball bearings
Included with System
  1. Control unit with fluid sensor
  2. Pump
  3. Dual float switch
  4. Battery box
  5. Battery cap to accommodate fluid sensor