Backup Pumps

Enlarge

Pro Series 2400

2,400 GPH at 10-foot lift
12-volt DC sump pump with decades of proven reliability
(2) Caged dual float switches for added reliability
Automatically switches to battery power when AC fails
Remote-monitoring capability by adding a Pro Series CONNECT Wifi Module, which sends real-time alerts via text, email or push notification about any issues or maintenance needed

USB data port and remote terminals connect to external devices such as a Pro Series CONNECT WiFi Module, home automation system or other devices for remote notification
Backup will assist primary pump if excessive amounts of water are entering the sump pit
System pumps intermittently for days
Can run directly on AC power and battery power
Automatically switches to battery power when AC fails
Recharges battery automatically
Designed for use with maintenance-free and wet-cell batteries
Accommodates up to two (2) B12-100 maintenance free AGM batteries for 110 hours of pumping (based on 10% duty cycle—runtimes may vary based on inflow of water)
3-year warranty

Controller Features:

Unique monitoring controller detects irregularities of pump and power conditions
Sounds and alarm, pinpoints problems and solutions on the control panel
Receive notifications about your Pro Series pumps and backup sump pump system while away from home using a Pro Series CONNECT WiFi Module
Alarm can be silenced during a power outage
Runs pump weekly to test for proper operation
Displays percentage of power remaining in the battery

	PHCC-1000	PHCC-1850	PHCC-2400
Flow @ 10 ft. GPH (3 M.) Head	1,000 GPH	1,850 GPH	2,400 GPH
Amps @ 10 ft. Total Head	6.5 Amps	10 - 12 Amps	20 Amps
Outlet	1.5" PVC adapter	1.5" PVC adapter	1.5" PVC adapter
Voltage	12 VDC	12 VDC	12 VDC
Power Input	115VAC, 60 Hz	115VAC, 60 Hz	115VAC, 60 Hz
Charger Strength Voltage/Current	12 VDC / .4 Amps	12 VDC / 1.6 Amps	12 VDC / 13 Amps
Motor Type	DC	DC	DC

	PHCC-1000	PHCC-1850	PHCC-2400
Will sound alarm indicating:
- Battery needs water
- Battery is old and needs to be replaced
- Battery is discharged
- Cable is loose or terminals are corroded
- Power, fuse or circuit breaker has failed
- Pump has been activated; Check the main pump for failure
The alarm can be silenced during a power outage
Automatically test pump weekly
USB Data Port (Ability to remotely notify which alert has activated or what specific maintenance might be needed)
Remote Terminal (Ability to remotely notify of a problem or needed maintenance)
Can accommodate similar standby batteries to extend the run time
Backup pump runs off AC power as well as battery power
Displays percentage of power remaining in the battery

The Pro Series CONNECT Line of Pumps have the ability to send email or text notifications when there is an issue or needed maintenance.

Notification with the USB Data Port:

With USB data port simply plug/attach the Pro Series CONNECT Module to your Pro Series 2400 Backup system and the module will act as a gateway to the internet
- Receive specific text or email alerts telling you exactly what is going on in the home

Notification with the Remote Terminal

Connects to a home security, auto dialer, or other dry contact based device
- Receive text or email alerts, notifying you of an issue or needed maintenance

Now, you can ‘be in-the-know when you’re on-the-go’.

* Run time based on 10% duty cycle. Run times may vary based on water flow.

Pump Housing	Non-corrosive ABS
Impeller	Fiber filled polycarbonate
Shaft Material	Stainless steel
Float Switch	Caged dual float, Micro-reed Switches
Pump Dimensions (W x D x H)	6.25” x 7.25” x 8.25” (15.9 x 18.4 x 20.9 cm)
Shipping Weight	23.0 lb (10.4 Kg)

Included with System