Combination Pumps

PS-C22_system_2023_570x570
Enlarge
PS-C22_system_2023_570x570
  • PS-C22_Left_570x570
  • PS-C22_Right_570x570
  • PS-C22_system_2023_570x570
 
  • PS-C22_Left_570x570
  • PS-C22_Right_570x570
  • PS-C22_system_2023_570x570

PS-C22 Combination Pumps

Features and Benefits

Model PS-C22
  • Preassembled primary and backup sump pump for quick and easy installation
  • 2,770 GPH at 10 ft. lift (S1033 primary pump)
  • 1,850 GPH at 10 ft. lift (1850 backup pump)
  • Backup will assist primary pump if excessive amounts of water are entering the sump pit
  • Remote-monitoring capability by adding a Pro Series CONNECT Wifi Module, which sends real-time alerts via text, email or push notification about any issues or maintenance needed
  • USB data port and remote terminals connect to external devices such as the Pro Series CONNECT Module, home automation systems or other devices for remote notification
  • Caged dual float switches provide dependable activation for primary pump
  • Dual float switch provide complete redundancy for the backup pump
  • System pumps intermittently for days
  • Automatically switches to battery power when AC fails
  • Recharges battery automatically
  • Designed for use with maintenance-free or wet-cell batteries
  • Accommodates up to two (2) B12-100 maintenance-free batteries for 140 hours of pumping (based on 10% duty cycle—runtimes may vary based on inflow of water)
  • 3-year warranty

PDF_download_icon_v2 PS-C22 Product Brochure

PDF_download_icon_v2 PS-C22 Product Manual

Where to buy

Controller Features:

  • Unique monitoring controller detects irregularities of pump and power conditions
  • Sounds an alarm, pinpoints problems and solutions on the control panel
  • Alarm can be silenced during a power outage
  • Tests pump weekly to exercise and extend pump life
  • Receive notifications about your Pro Series combo pump system while away from home using a Pro Series CONNECT WiFi Module

Specifications

Primary Pump PS-C11 PS-C22 PS-C33
Flow at 10' Head 2,770 GPH 2,770 GPH 3,000 GPH
Max Head 29' / 8.8 m 29' / 8.8 m 30' / 9.1 m
Discharge 1-1/2" 1-1/2" 1-1/2"
Motor HP 1/3 1/3 1/3
Voltage 115 VAC, 60 Hz 115 VAC, 60 Hz 115 VAC, 60 Hz
Amp. draw at 10' 3.8 3.8 4.0
Backup Pump
Flow at 10' Head 1,000 GPH 1,850 GPH 2,400 GPH
Voltage 12 VDC 12 VDC 12 VDC
DC Current 6.5 Amps 10 - 12 Amps 20 Amps

Controller Comparison

  PS-C11 PS-C22 PS-C33
Will sound alarm indicating:      
 - Battery needs water Dot Dot Dot
 - Battery is old and needs to be replaced Dot Dot Dot
 - Battery is discharged Dot Dot Dot
 - Cable is loose or terminals are corroded Dot Dot Dot
 - Power, fuse or circuit breaker has failed Dot Dot Dot
 - Pump has been activated; Check the main pump for failure Dot Dot Dot
The alarm can be silenced during a power outage Dot Dot Dot
Automatically test pump weekly   Dot Dot
USB Data Port (Ability to remotely notify which alert has activated or what specific maintenance might be needed)   Dot Dot
Remote Terminal (Ability to remotely notify of a problem or needed maintenance)   Dot Dot
Can accommodate similar standby batteries to extend the run time   Dot Dot
Backup pump runs off AC power as well as battery power     Dot
Displays percentage of power remaining in the battery     Dot

Remote Notification

The Pro Series CONNECT Line of Pumps have the ability to send email or text notifications when there is an issue or needed maintenance.

Notification with the USB Data Port:

  • With USB data port simply plug/attach the Pro Series CONNECT Module to your Pro Series 1850 Backup system and the module will act as a gateway to the internet
    • Receive specific text or email alerts telling you exactly what is going on in the home

Notification with the Remote Terminal

  • Connects to a home security, or other dry contact based device
    • Receive text or email alerts, notifying you of an issue or needed maintenance

Now, you can ‘be in-the-know when you’re on-the-go’.

Pumping Time*

  PS-C11 PS-C22 PS-C33
B-1000 50 Hours Not Recommended Not Recommended
B-2200 100 Hours 60 Hours 50 Hours
(2) B-2200 Not Recommended 120 Hours 100 Hours
B12-90 100 Hours 60 Hours 50 Hours

Run time based on 10% duty cycle. Run times may vary based on water flow.

* Not Recommended for PHCC-1730 controllers without the Remote Terminal

Construction and Included Components

Primary Pump
  • Permanent Split Capacitor (PSC) motor
  • Upper and lower sealed ball bearings
  • Cast-iron/cast-aluminum housing
  • Stainless-steel shaft
  • Dual carbon ceramic shaft seals plus additional Buna N seal
  • Polycarbonate impeller
Backup Pump
  • Noncorrosive ABS housing
  • Stainless-steel shaft and fasteners
  • Carbon ceramic seal w/ Buna N seal
  • Noncorrosive fiber filled impeller
  • Dual ball bearings
Float Switch (1) Caged Dual, Micro-Reed Switches
(1) Dual, Micro-Reed Switches
System Dimensions
(W x D x H)		 8.9" x 11.0" x 26.75"
(22.6 x 27.9 x 68 cm)
Shipping Weight 39.05 lb (14.5 kg)

Included with System                      

  • Preassembled:
    • Primary pump
    • Backup pump 
    • (3) 1½-inch standard, no-hub couplings
    • (2) Standard check valves with hardware
    • Sump Foot - raises and secures both pumps
  • Backup system controller/charger with fluid sensor
  • Primary pump Enhanced Controller with caged dual float switch (DFC1.5)
  • Battery box